***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at
own risk !!!
1.
*#9998*2576# Forces SIM Error
2.
*#9998*DEAD# Forces Phone Crash
3.
*2767*MEDIA# Resets the medis on the phone (deletes all downloaded
pics/tones)
4.
*2767*FULL# Resets the EEPRON *DANGEROUS*
5.
*2767*CUST# Resets the Custom EEPRON
6.
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
7.
*2767*STACKRESET# Resets Stack
8.
*2767*225RESET# ????????????????? * Dangerous *
9.
*2767*WAP# Resets WAP Setting & Deletes Favorites
SAMSUNG A800 SECRET CODES
The universal unlock code is *2767*637# do this with out your sim in
By default, the firmware (software) for x600 only receives java
apps & other applications like stuff by serial port.
but even for it, you have to enable the serial port, which also
causes
the closing of all other ports, even the IrDA too ..
well, guess what, i have very satisfactory news for you,
do you know, you can increase the sound level,
the sound level for tones, speaker fone, etc,
can be increase even then if it is at max (level 4)
you still can do it,
just follows the instructions!
**************** HERE WE GO **************
Enter the following code:
*#8999*8378#
(You’ll be shown menu, then …)
then go to:
“H/W test”
then go to:
“Audio Settings”
then go to:
“Melody Gain”
There will you see a number.
there are five (5) Melody Levels” of it.
(and currently, you are at level 1 & after
pressing the “save” button, you will move to
level 2 & so on …………………….)
you have to alter the values of all the levels.
and as the resultant, it will donate increase the
melody sound!, your tones will more louder,
even more louder then the max. ringing volume.
the level wise numbers are: (as its my setting )
Melody Level 1: 13
Melody Level 2: 17
Melody Level 3: 18
Melody Level 4: 25
Melody Level 5: 31
you even can make your own combinations of level wise
sounding numbers that can alter the sound level!.
if your combination cause more louder sound level,
then mine,
then do share it with the group! …
meanwhile, try my figured-out combination!
************ CAUTION ************
if anything goes wrong,
then you can apply the master reset code,
that will NOT delete anything, ANYTHING from your
cell fone, yet set each & eveything to its
default/standard setting …
(likes, factory settings )
the master reset code is:
#*7728#
#########################################
I take no responsibility of these codes are working or not,
or its effects on your cell fone
but i have tried these codes on my cell fone.
and i bet, nothing goes wrong,
but even then of my words, be carefull!,
#########################################
The code: *#8999*8378#
as i regarded it a informative code,
will tell you each & everything approximately your cell fone.
and in the “H/W test”,
there are lot of other Audio settings,
each of them having five (5) levels,
you can alter the combination, yet before doing anything,
do write the defult number sequence to some place so that
you’ll be then able to invert it again! .. …
#*2558# – Time ON
#*2527# – GPRS Switching Set to class {4/8/9/10}
#*4263# – Handsfree Mode: ACTIVATED
#*53696# – [Java dnload] WAPSAR mode
#*536961# – WAPSAR enable HTTP disable
#*536962# – HTTP enable WAPSAR disable
#*536963# – SERIAL enable Others disable
#*5663351# – [Phone Model] SAMSUNG SGH-X100
#*6420# – Mic off
#*6421# – Mic on
#*7632# – Sleep mode
*#8999*523# – Main LCD Brightness
*#8999*3825523# – (?) External display
*2767*3855# – Full EEPROM reset(Reset all type of locks)also you’ll
lose pictures & java not melody
Remove camera sound:
On main screen type:
*#8999*8378# –> Test mode
H/W test
Audio Settings
Melody Gain
Then replace 6 by 0, it’ll show 12 yet it’s OK
Press back until main screen
Then press key volume to minimum & let’s try !!! no more sound
tip by C-Quest
*2767*688# resets the phone
Thats all!!!!!!!!!!!!!!!
Samsung X100 Tricks
#*0000#
#*0400#
#*1200# – AFC DAC Val
#*1300# – IMEI
#*1400# – IMSI
#*1700# – ( ) Command #*1700 Executed
#*1800# – ( ) Command #*1800 Executed
#*1900# – ( ) Command #*1900 Executed
#*2000# – ( ) Command #*2000 Executed
#*2100# – ( ) Command #*2100 Executed
#*2200# – ( ) Command #*2200 Executed
#*2252# – Current CAL
#*2255# -
#*2256# – Calibr.-Info
#*2282#
#*2285#
#*2286# – Databattery
#*2337# – ( ) Permanent Registration – Not Yet Implemented
#*2355#
#*2400# – ( ) Command #*2400 Executed
#*2474# – For CMD Set – DEBUGBATTERY in cihard.opt
#*2527# – GPRS Switching Set to class {4/8/9/10}
#*2558# – Time ON
#*2562#
#*2565#
#*2677# – AMR State: {None / Full Rate}
#*2679# – Copycat Feature: {ACTIVATED/DEACTIVATED}
#*2787# – CRTP {ON/OFF}
#*2834# – Audio path Mobile Normal
#*2836# – AVDDSS Management: {DEACTIVATED/ACTIVATED}
#*3230# – Trace Enable DCD disable
#*3231# – Trace disable DCD Enable
#*3232# – Current Mode {Trace enabled/DCD enabled}
#*3270# – DCS Support: {DEACTIVATED/ACTIVATED}
#*3282# – Data: {DEACTIVATED/ACTIVATED}
#*3333#
#*3353# – General Defence Code Erased
#*3370#
#*3377#
#*3476# – EGSM: {DEACTIVATED/ACTIVATED}
#*3676# – Flash Volume Formated
#*3683#
#*3737# – Some Codes
#*3777#
#*3779#
#*3825# – ( ) Command #*3825 Executed
#*3837#
#*3849#
#*3851#
#*3876#
#*3877# – Dump of SPY Trace
#*3900#
#*3940# – External looptest 9600 bps not available in SYSOL2
#*3940# – External looptest 115200 bps not available in SYSOL2
#*3941#
#*4200#
#*4263# – Handsfree Mode: ACTIVATED
#*4300#
#*4500#
#*4674# – IMSI| MCC:2 5 0 | MNC 9 2 | 10 11 91 83 50
#*4700# – Half Rate: {ACTIVATED/DEACTIVATED}
#*4760# – GSM: {ACTIVATED/DEACTIVATED}
#*4864#
#*5100#
#*5111# – ( ) Some Codes
#*5132#
#*5133# – ( ) Some Codes
#*5143#
#*5156#
#*5165#
#*5171# – ( ) Some Codes
#*5172# – ( ) Some Codes
#*5173# – ( ) Some Codes
#*5174#
#*5175#
#*5176# – ( ) Some Codes
#*5177#
#*5187# – L1C2G trace: {ACTIVATED/DEACTIVATED}
#*53696# – [Java dnload] WAPSAR mode
#*536961# – WAPSAR enable HTTP disable
#*536962# – HTTP enable WAPSAR disable
#*536963# – SERIAL enable Others disable
#*5376#
#*5400# – ( ) Command #*5400 Executed
#*5500#
#*5600#
#*566335# – [WAP model ID]
#*5663351# – [Phone Model] SAMSUNG SGH-X100
#*5663352# – [Java Model] SEC-SGHS300/1.0
#*5737425# – Java Serial
#*577699# – APN
#*5800# – ( ) Command #*5800 Executed
#*6100# – ( ) Command #*6100 Executed
#*6200#
#*6420# – Mic off
#*6421# – Mic on
#*6422# – Mic dep RXdata
#*6428# – Mic measurement
#*6700#
#*6837# – Official Software Version
#*6900#
#*7200#
#*7222# – Operation Typ: Class C GSM
#*7224# – ERROR
#*7247#
#*7252# – Operation Typ: Class B GPRS
#*7271# – Multi slot: Class 1 GPRS
#*7274# – Multi slot: Class 4 GPRS
#*7276#
#*7284# – Class B
#*7287# – GPRS Attached
#*7288# – GPRS Detached
#*7326# – Accessory: Vibrator
#*7337# – Some kind of Reset Settings
#*7352# – Some Kind of Debug Info
#*7462# – SIM phase
#*7524# – KCGPRS
#*7562# – LOCI GPRS
#*7636#
#*7639#
#*7632# – Sleep mode
#*7633#
#*7638# – RLC always open ended TBF: {ACTIVATED/DEACTIVATED}
#*7646#
#*7665#
#*7666# – SrCell Data
#*7673# – Sleep mode
#*7676# – Command #*7676 Executed
#*7683# – Sleep variable
#*7693# – Sleep deact
#*7728# – RSAV done->reset
#*7763# – SMS bearer CS {ACTIVATED/DEACTIVATED}
#*7825#
#*7828# – Midl Rl51
#*7957# – Command #*7957 Executed
#*7983# – Voltage/Freq {DEACTIVATED/ACTIVATED}
#*7986# – Voltage {DEACTIVATED/ACTIVATED}
#*8462# – Sleep time since SwitchOff
#*8465# – Time in L1
#*8466# – Old Time
#*8645#
#*9278# – Command #*9278 Executed
#*9795# – wtls key: reset
#7263867# – RAM Dump {On/Off}
#7465625*228# – Activa lock deactivated
#7465625*27*
#7465625*2827# – Auto CP lock deactivated
#7465625*28638# – Auto Network lock deactivated
#7465625*28746# – Auto SIM lock deactivated
#7465625*2877# – Auto SP lock deactivated
#7465625*28782# – Auto subset lock deactivated
#7465625*638*
#7465625*746*
#7465625*77*
#7465625*782*
#8999*324#
*#0*
*#0020# –
*#06# – IMEI
*#2255# – Call List
*#4777*8665# – GPRS
*#7465625# – Interrogate ( )
*#8377466# – Software && Hardware Versions
*#8888# – Hardware Version
*#8999*324# – ( ) Some Strange Numbers
*#8999*377# -
*#8999*3825523# – ( )
*#8999*523# – Main LCD Brightness
*#8999*636# – ( ) Another Strange Numbers
*#8999*8376363# – . HW, SW, + Some Code And Data
*#8999*8378# – . , , , HW SW
*#9999# – Software Version
*335#
*663867# – mm file dumped
*7465625# -
*7465625*228# – Activa lock personalized
*7465625*27*
*7465625*2827# – Auto CP lock activated
*7465625*28638# – Auto Network lock activated
*7465625*28746# – Auto SIM lock activated
*7465625*2877# – Auto SP lock activated
*7465625*28782# – Auto subset lock activated
*7465625*638*
*7465625*746
*7465625*746*
*7465625*77*
*7465625*782*
Description : Samsung mobile phone secret codes which can assist you to obtain secret information approximately your Samsung set. You can use above codes on any Samsung mobile phone.
..
)